With the development of economy, people's living conditions are getting better and better. Many families will choose to install floor heating. So how does the floor heating controller control the temperature? Next, follow Xiaobian to have a look.
1、 How does the floor heating controller control the temperature
1. The floor heating thermostat has a switch. Turn on the switch and set it according to the number in the display box of the floor heating thermostat. It is normal if the temperature is 2 to 3 degrees higher than the room temperature. 2. Then press the mode mode mode to set the floor heating temperature controller to the manual mode. When the temperature of the floor heating temperature controller reaches the same level, the temperature controller will rise by 2 to 3 degrees and be controlled at about 18 to 20 degrees.
2、 How to maintain floor heating
1. The ground heating cannot rise suddenly when starting
We all know that floor heating is frequently used in life. If the temperature of the floor heating system is suddenly increased when the indoor temperature is too low, and it has not been adapted by a suitable temperature, the whole floor heating system is very prone to serious damage. Therefore, in this case, the use of the floor heating system will affect its service life, reduce its service life, and even lead to the deformation of the floor.
2. Temperature effect
In general, if the floor heating is not turned on in cold winter, special attention must be paid to the water collector. Mainly because it will be affected by the weather, the water collector is easy to freeze and damage, resulting in cracking.
3. Maintenance of water collector
Therefore, when the temperature has reached below zero, we must use the air compressor to blow out all the water in the water collector. If the water inside is not blown out, it is easy to freeze inside. When it freezes, it will naturally expand, resulting in blockage of the pipeline, so we must pay more attention to this.